Louvre Mop Sleeve - Large (152)

Replacing your microfibre pad is quick and easy:

1. Use a Slide Guide  – To prevent the pad from sticking too soon.

Prepare a piece of  paper or thin plasic approximately 200mm x 80mm (8 inches x 3 inches). This is your 'Slide Guide'. 

 

2. Fold and Slide the Pad

Fold the Microfibre Pad at about 2/3rds with the white facing outside. Hold the Slide Guide over the Microfibres Pad, then insert the ends one at a time over the metal frame.  The Slide Guide should be inbetween the Microfibre Pad and the metal frame.

 

3. Remove the Slide Guide

Once the pad is correctly positioned, remove the slide guide, allowing the Velcro to grip securely.

Your XPRT Louvre Mop is now ready for streak-free cleaning!

Before use, gently run your fingers over the microfiber pad to ensure there are no sharp debris or particles that could scratch the glass.

We recommend adding a tiny amount of detergent when cleaning louvres. Use a professional window cleaning detergent like Glass Gleam 3 for a streak-free finish. Otherwise, a mild dishwashing detergent can be used as an alternative. Be careful not to use too much detergent, as it will take much more rinsing to leave it spotless.

After use, rinse the microfiber pad under warm water to remove dirt and debris.

For a deeper clean, remove the pad by pulling one end off the aluminium frame.  Machine wash the pad on a gentle cycle using mild detergent. Do not use fabric softeners, as they can reduce the microfiber’s effectiveness.

• Online direct (you're already here)
• In-store or online:

https://www.windowcleaningworld.com/louvre-mop-sleeve-large

https://windowcleaningsupplies.com.au/louvre-mop-sleeve-large.html